Hot water is an absolute essential in any household. It is sometimes impossible even to imagine doing a bath without hot water, as it not only relaxes the body muscles but also makes us feel better on a busy day. That is what makes water geysers one of the most important appliances in every home. When you start searching to buy a water heater online, the first question that comes in your mind is which one to choose like – instant geyser vs storage geyser, which one is better, their power consumption, will it be enough for my family needs and so on.
Before you make a decision, you will have to pay attention to the differences between instant and storage geysers as it helps to make a perfect decision.
The Two Main Types of Water Geysers – Instant, and Storage
It is important to address instant and storage geysers play a crucial role in your decision of choosing a water heater as they both works differently.
As the names suggest, instant geysers heat up water instantly as the water runs through it, whereas storage geysers keep larger amounts of water stored in a heated compartment.
Instant geysers provide hot water as soon as you turn them on. They are significantly smaller and will take up less space in the bathroom. Storage geysers, on the other hand, have a slight delay in providing hot water. For instance, you might have to wait five to ten minutes for the water to heat up before you can use it.
The heating time depends on the size and quality of the geyser. Also, keep in mind that storage geysers are a lot bulkier and will take up more space on the wall.
Instant electric geysers are more efficient in terms of not wasting any hot water and using less energy to heat it up. However, storage geysers allow you to use a stream of hot water for a long period of time without interruptions.
With that said, here are the main differences between these two types of water geysers.
Instant Geyser vs Storage Geyser: The Main Differences
Some of the obvious differences between instant geyser vs storage geyser units are their way of working, size, heating, and time. However, there are even more differences, that are well worth considering. So, we are now going to dive into more detailed differences below:
Time for Heating
Instant water geysers, as the name suggests, provide hot water as soon as you turn it on and just wait for 1 or 2 minutes. This is a perfect solution for people who want to have a source of hot water readily available whenever they need it.
Storage geysers, on the other hand, require a heads up before you start using the hot water. You will need to turn the geyser around ten minutes before use or even longer depending on the type of unit and capacity.
In other words, storage geysers take a longer time to heat up water compared to instant ones but storage ones gives a large amount of hot water compared to instant ones in a single go.
Also, the temperature of water can act on the time required for heating.
Suited for Individual or Family
Instant geysers are not the best option for those who prefer long baths because they can usually release 3 liters of hot water before needing a break, or some liters more depending upon the model. If you are taking a long shower, you could potentially end up waiting for the next round of hot water from your instant geyser.
Once the capacity of instant water is finished, you need to wait a minute or so. If not, the water comes with a lesser temperature ending up in an unpleasant experience.
With a storage electric geyser, on the other hand, you will have a continuous stream of hot water available, which also depends on the capacity of the unit.
For large families, large capacity storage geyser is the best option for bathroom use, whereas average-sized instant geysers are good enough for smaller families or ones who don’t need much hot water for bathing.
With instant electric geysers, there is no such thing as capacity as they usually come with a fixed 3 liters capacity. You do not have to worry about running out of hot water because the geyser will heat up the water as it flows into it.
Storage geysers, on the other hand, have a certain water capacity, so you need to choose the storage geysers as per your requirements. Usually, they are available in the capacity of 10, 15, 20, 25 Liters, and some times smaller or larger than the ones mentioned above.
Keep in mind that the higher capacity you choose for a storage geyser, the more space it is going to take, and maybe a notable point in case if you want to fix it in a small bathroom.
Both instant and storage water geysers offer a certain level of water temperature adjustment depending upon the model. However, the temperature settings and their quality will depend on the specific unit and manufacturer.
Some of the more expensive geysers will allow you to set specific water temperatures upfront, regardless if they are storage or tankless geysers. Usually storage electric geysers have a much higher temperature range to choose from.
If you live in a high rise apartment, the pressure resistance of a geyser plays a very important role, as the pressure of water inflow is very high especially for those who live on lower floors.
As a result of high pressure, by the time the storage tank may become weak and result in leakage, so it is very important to get a geyser that can withstand high pressures.
In this case, most of the storage water heaters in the market come with an 8 bar pressure resistance or even more, and in instant geysers it will be around 6 or 6.5 and sometimes more. However, the ability to withstand the pressure also depends upon the model you are selecting, the coating material, etc.
So, try to select the geyser that can withstand high pressures, especially if you live in high rise apartments or in the lower floors.
The difference in instant geyser vs storage geysers power consumption is a very important factor while making a purchase because all of us have concerns about the electricity bills and always in a doubt like which one consumes more power.
Both these water heaters usually consume more or less the same amount of power. Its because finally you are getting the same bucket of hot water and in case the temperature settings are the same.
But instant ones are comparatively little less power consuming because the water is just released out upon heating. While in storage geysers, the temperatures are needed to be maintained until the water is utilized.
The longer you keep the water stored in the storage geyser, the more energy it is going to consume to keep it hot.
Storage geysers require more wall-mounting space compared to instant geysers because of the large storage compartment. The higher the water capacity you choose, the more space you are going to need.
That is why instant geysers are recommended as a more space-efficient option if you have small bathrooms.
Also, you can choose a storage geyser with smaller capacity in such case but keep in mind that you will be running out of hot water more frequently and wait until the green switch to on while bathing.
Lifespan and Warranty
When it comes to the lifespan, instant geyser units are expected to last longer than storage ones because they do not have a complex water tank system.
Several factors act on the lifespan of a geyser like the type of water – hard or soft, frequency of use, etc. In terms of years, storage water heater lasts on average about 8 to 12 years and instant water heaters for about 10- 15 years.
But, ensure to get choose a geyser with a good warranty period which helps incase if the geyser runs into a problem.
Price Differences Between Instant Geyser vs Storage Geyser
Storage geysers are generally more expensive than instant ones because of their capacity and heating power. However, the exact price will depend on the capacity of the geyser, as well as the features and brand behind the product.
Although Storage geysers have a higher initial cost, It is also important to keep in mind that Storage geysers are a much convenient option if you have a large family as well as to use for laundry or other household purposes.
Supply of Water for Other Uses
Instant geysers might not be the best option for showers and also especially for larger families. These geysers have a certain limitation of how much hot water they can provide before taking a break.
Storage geysers, on the other hand, are the best option for bathing, doing large amounts of laundry or even for kitchen use, etc.
Maintenance & Repair
Lastly, instant water geysers require more maintenance compared to storage geysers which is another considerable point.
Storage tanks on the other hand don’t need maintenance as instant ones. However, they can get into problems like scale build-up, corrosion, etc. to deal with.
When to Get an Instant Water Geyser?
An instant water geyser is a great solution especially if you want to save your time and take a quick bath, where you do not need a large amount of hot water and also even if you don’t require hot water for your washing machine or any other purposes.
Although it is not suitable for long baths or showers, an instant water geyser will come in handy for a quick bath.
Before you get an instant water geyser, make sure the water flow rates and water hardness in your household are suitable for these units. However, instant water geysers are worth the investment considering that they will save you water and energy in the future.
When to Get a Storage Water Geyser?
A storage water geyser is a better option for those who like to have long baths or showers or to fulfill the needs of a large family. These geysers do not require as much maintenance as tankless ones, although they do have some drawbacks that must be mentioned.
For instance, storage geysers you have to turn the geyser on several minutes before use to allow the water to heat up in the tank. And also they may use extra energy to keep the water hot if you don’t use it right after heating it up.
Overall, storage water geysers with big water capacity are suitable for bathing, doing laundry, or other tasks that require large amounts of water.
Instant Geyser vs Storage Geyser: Overall Cost and Installation.
We are going to cover the overall cost differences between instant geyser vs storage geyser power consumption and installation.
Instant geysers generally cost lesser than storage geysers as a unit and also in the long run with respect to the power bills as they consume a bit less electricity compared to storage ones.
But you need to keep in mind that instant geysers are difficult to deal with in situations with repairs or maintenance as you may need the help of a plumber or professional for it.
Although Storage geysers, on the other hand, are a bit more expensive they can satisfy almost all the family needs, which is the reason many people opt for them.
However, keep in mind that storing water in a large tank requires continuous use of energy to keep the water hot, which will add a bit to your monthly energy bill.
Several factors like the reputation of the brand, build material, heating element, quality, etc influence the overall price of the geyser.
On average, an instant water heater with a 3 liters capacity will cost you around 2500-3000 INR. while the storage geysers with 15 Liters capacity will cost you around 5000 to 7000 INR and the ones with 25 Liters capacity will be around 6000 to 9000 INR.
Coming to the installation costs, some of the manufacturers provide installation free of cost, while some charge for installation and is usually around 400 to 500. Some extra wiring or flex pipes may add to your setup cost if required.
Overall, the main difference between instant geyser vs storage geyser units is worth considering. As ending up in a wrong geyser could be a bit headache as you may need to use it for years to come. So, look at every point, your family requirements, etc before you buy.
Although instant ones cost less, investing in a storage one too doesn’t cost you much as the difference in their cost just lies in a few thousand.
So which one do you think that suits your requirements? or if you have any more questions regarding the selection of a geyser, just comment below. We would be happy to help you.